Chengdu Generator Leasing
Leasing Engine: Giant Energy Diesel Engine Leasing Service Department Tel: Mr. Sun 13808070896 Ms. Chen 15828360146
Preparations before starting the generator set:
1. Operators of the equipment room shall observe the safety operation regulations, wear work clothes and insulated shoes, and the crew shall clearly define the division of labor;
2. Check whether the anti-railing cover of flywheel and generator is intact;
3. Check each gearbox, clutch, governor, oil level, various fasteners, etc., and confirm that they are intact. Only start when the oil and water temperature is not lower than 20 degrees.
4. Set the sluice gate of each system to the "working" position;
5. Check the link bolts of the transmission mechanism and tighten them;
6. Check whether the pressure of the clutch handle is normal and whether the overspeed safety device is positioned;
7. Check whether the pressure of the gas storage tank is normal and whether the overspeed safety device is positioned;
8. Open the blowdown valve of the air pump;
9. Check whether the circulating water pump, oil pump and fuel pump are normal;
10. Set the excitation resistance to the maximum resistance position, and turn off the power switch.